TrimLine KXNP33 Heat Exchangers

NEMA TYPE 12
MAINTAINED

$2,065.00


Update Qty

Show Price Breaks ▼ Hide Price Breaks ▲

Quantity	Price Each
1-1	$2,065.00
2-4	$2,024.00
5-9	$1,859.00
10-24	$1,735.00
25-49	$1,611.00
50-99	$1,549.00
100+	$1,478.00

3 in stock. Ships in 2-3 business days.
Order 1 more and pay $2,024.00 each

Select Model Type

Electrical (Volts):

Model	Volts	Power		Maximum Temperature °F		Performance Watts/°F (Air In)	Approx. Weight (lbs.)
Model	Volts	Amps	Watts	Enclosure	Ambient	Performance Watts/°F (Air In)	Approx. Weight (lbs.)
KXNP33	115	2.60	227	160	-20 to 131	33	56
K2XNP33	230	1.90	227	160	-20 to 125	33	56
K7XNP33	24VDC	10.0	240	160	131	33	56
K8XNP33	48VDC	5.8	270	160	131	33	56

60 Hz. operation. For 50 Hz. operation, consult Kooltronic.

TECHNICAL DATA

Model Number	Volts	Performance Watts/°F (Air In)
KXNP33	115	33
Power, Amps: 2.60 Power, Watts: 227 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: -20 to 131 Approx. weight: 56 lbs. (25 kg)
K2XNP33	230	33
Power, Amps: 1.90 Power, Watts: 227 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: -20 to 125 Approx. weight: 56 lbs. (25 kg)
K7XNP33	24VDC	33
Power, Amps: 10.0 Power, Watts: 240 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: 131 Approx. weight: 56 lbs. (25 kg)
K8XNP33	48VDC	33
Power, Amps: 5.8 Power, Watts: 270 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: 131 Approx. weight: 56 lbs. (25 kg)

60 Hz. operation. For 50 Hz. operation, consult Kooltronic.

Standard Features
Accessories & Options
Airflow Diagram
Performance
Arrangement
Similar Models
Documents

• Closed-Loop Near-Ambient Cooling
• Convoluted aluminum element
• Epoxy-coated element

Fabricated to the same standards as the uncoated convoluted aluminum elements, these are made from epoxy-coated aluminum stock that exceeds 1000 hour salt spray testing requirements.

• Filter

All Kooltronic filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible. A non-drying adhesive coating traps a high percentage of particulate matter. These filters are reusable, they may be washed and recoated with the appropriate filter recoating adhesive. Replacement filters are available and can be ordered online at kooltronic.com/spareparts.

• Heavy-Duty Steel Shell
• NEMA 12 Rating at Mounting Interface

All units NEMA 12 rated at the mounting interface ONLY.

• Removable Element Access Panel
• UL/CUL Listed

• Aluminum Shell

Where light weight and/or compatibility with appearance of aluminum enclosures are required. Unpainted Type 5052 is standard. Other types and ultraviolet-resistant baked powder finish are available.

• Filter Recoating Adhesive

This compound is a superior product for recoating filters after washing. The adhesives penetrate dirt layers to keep the filter surface tacky for longer effective performance between washings.

• Lifting Eyes

Heavy-gauge steel lifting eyes, attached to the side panels, assist in positioning units.

• Low Airflow Detector

Similar to the Airflow Switch shown in the Blower Accessories Section, the switch is installed in a suitable location in the air conditioner to detect loss of airflow, and sends a signal to a terminal block, through which user-installed wiring and warning devices are activated.

• Other voltages and frequencies
• Replacement Filters

All KOOLTRONIC filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible.,A non-drying adhesive coating traps a high percentage of particulate matter. These filters are reuseable, they may be washed and recoated with the appropriate filter recoating adhesive. Replacements are available for those which become damaged or otherwise non-serviceable.

• Special materials or finishes
• Special motors, line cords or connectors
• Stainless Steel Shell
• Temperature Alarm

A thermostat is mounted inside the cabinet and attached to a sensor in the warm air return. When the air temperature increases to the set point, a signal is sent to a terminal block. User-installed wiring from the terminal block to local and/or remote warning devices (light, bell, siren, etc.) can be for normally open or closed operation.

Click on image for larger view
Airflow Diagram Thumbnail

Dimensions, inches [mm], are for reference only and subject to change.

Click on image for larger view
General Arrangement Thumbnail

TrimLine KXNP33 general arrangement drawing

Dimensions, inches [mm], are for reference only and subject to change.

Model	Guideline Dimensions (H x W x D)*	CFM @0" S.P.
TrimLine KXNP36	36.75 x 15.18 x 9.75	0
*See model specifics for drawings, dimensions, mounting or cutout plans.

Literature

	Condensate Evaporator Kits [241Kb]
	Increasing the Lifespan and Reliability of Electrical Components [212Kb]
	Kooltronic Custom Capabilities Flyer [2194Kb]
	Kooltronic Custom Cooling Medical Flyer [211Kb]
	Kooltronic Design Guide/Catalog (220 pages) [229400Kb]
	Kooltronic Refrigeration System Manufacturing [55Kb]
	Kooltronic Standard Warranty [55Kb]
	Kooltronic Unit Longevity Press Release [167Kb]
	NEMA Enclosure Ratings [91Kb]
	Short-Form Catalog (16 pages) [897Kb]
	Airflow Switch Data Sheet [159Kb]
	Heat Exchanger Quick-Sheet [90Kb]
	Laboratory Environmental Testing Services [157Kb]
	Powder Paint Application Facilities Flyer [165Kb]

Operator's Manual

KLLC100 Lead-Lag Controller (Discontinued) [38Kb]
KLLC480 Lead-Lag Controller [79Kb]
KXNP Series Operator's Manual [423Kb]

Contact Info:
	Kooltronic, Inc. 30 Pennington-Hopewell Road Pennington, NJ 08534 USA
	609-466-3400 800-321-KOOL
	609-466-1114 (fax)
	Contact Us

	KLLC100 Lead-Lag Controller (Discontinued) [38Kb]
	KLLC480 Lead-Lag Controller [79Kb]
	KXNP Series Operator's Manual [423Kb]

TrimLine Series KXNP33Air-to-Air Panel-Mounted Heat Exchangers

TrimLine Series KXNP33
Air-to-Air Panel-Mounted Heat Exchangers