TrimLine KXNP47 Heat Exchangers

NEMA TYPE 12
MAINTAINED

Select Model Type

Electrical (Volts):

Model	Volts	Power		Maximum Temperature °F		Performance Watts/°F (Air In)	Approx. Weight (lbs.)
Model	Volts	Amps	Watts	Enclosure	Ambient	Performance Watts/°F (Air In)	Approx. Weight (lbs.)
KXNP47	115	3.40	354	160	-20 to 131	56	79
K2XNP47	230	1.70	354	160	-20 to 131	56	79
K7XNP47	24VDC	12.3	296	160	131	56	79
K8XNP47	48VDC	7.9	370	160	131	56	79

60 Hz. operation. For 50 Hz. operation, consult Kooltronic.

TECHNICAL DATA

Model Number	Volts	Performance Watts/°F (Air In)
KXNP47	115	56
Power, Amps: 3.40 Power, Watts: 354 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: -20 to 131 Approx. weight: 79 lbs. (36 kg)
K2XNP47	230	56
Power, Amps: 1.70 Power, Watts: 354 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: -20 to 131 Approx. weight: 79 lbs. (36 kg)
K7XNP47	24VDC	56
Power, Amps: 12.3 Power, Watts: 296 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: 131 Approx. weight: 79 lbs. (36 kg)
K8XNP47	48VDC	56
Power, Amps: 7.9 Power, Watts: 370 Max. Enclosure Temp. °F: 160 Max. Ambient Temp. °F: 131 Approx. weight: 79 lbs. (36 kg)

60 Hz. operation. For 50 Hz. operation, consult Kooltronic.

Standard Features
Accessories & Options
Airflow Diagram
Performance
Arrangement
Similar Models
Documents

• Closed-Loop Near-Ambient Cooling
• Convoluted aluminum element
• Epoxy-coated element

Fabricated to the same standards as the uncoated convoluted aluminum elements, these are made from epoxy-coated aluminum stock that exceeds 1000 hour salt spray testing requirements.

• Filters

All KOOLTRONIC filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible. A non-drying adhesive coating traps a high percentage of particulate matter. These filters are reuseable, they may be washed and recoated with the appropriate filter recoating adhesive. Replacements are available for those which become damaged or otherwise non-serviceable.

• Heavy-Duty Steel Shell
• NEMA 12 Rating Maintained (UL50)

All units are fully gasketed for tight, leak-proof installation, in compliance with the NEMA 12 Enclosure Ratings.

• Removable Element Access Panel
• UL/CUL Listed

• Aluminum Shell

Where light weight and/or compatibility with appearance of aluminum enclosures are required. Unpainted Type 5052 is standard. Other types and ultraviolet-resistant baked powder finish are available.

• Filter Recoating Adhesive

This compound is a superior product for recoating filters after washing. The adhesives penetrate dirt layers to keep the filter surface tacky for longer effective performance between washings.

• Lifting Eyes

Heavy-gauge steel lifting eyes, attached to the side panels, assist in positioning units.

• Low Airflow Detector

Similar to the Airflow Switch shown in the Blower Accessories Section, the switch is installed in a suitable location in the air conditioner to detect loss of airflow, and sends a signal to a terminal block, through which user-installed wiring and warning devices are activated.

• Other voltages and frequencies
• Replacement Filters

All KOOLTRONIC filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible.,A non-drying adhesive coating traps a high percentage of particulate matter. These filters are reuseable, they may be washed and recoated with the appropriate filter recoating adhesive. Replacements are available for those which become damaged or otherwise non-serviceable.

• Special materials or finishes
• Special motors, line cords or connectors
• Stainless Steel Shell
• Temperature Alarm

A thermostat is mounted inside the cabinet and attached to a sensor in the warm air return. When the air temperature increases to the set point, a signal is sent to a terminal block. User-installed wiring from the terminal block to local and/or remote warning devices (light, bell, siren, etc.) can be for normally open or closed operation.

Click on image for larger view
Airflow Diagram Thumbnail

Dimensions, inches [mm], are for reference only and subject to change.

Click on image for larger view
General Arrangement Thumbnail

TrimLine KXNP47 general arrangement drawing

Dimensions, inches [mm], are for reference only and subject to change.

Model	Guideline Dimensions (H x W x D)*	CFM @0" S.P.
TrimLine KXNP36	36.75 x 15.18 x 9.75	0
TrimLine KXNP59	59.56 x 17.18 x 13.75	0
*See model specifics for drawings, dimensions, mounting or cutout plans.

Literature

	Condensate Evaporator Kits [241Kb]
	Increasing the Lifespan and Reliability of Electrical Components [212Kb]
	Kooltronic Custom Capabilities Flyer [2194Kb]
	Kooltronic Custom Cooling Medical Flyer [211Kb]
	Kooltronic Design Guide/Catalog (220 pages) [229400Kb]
	Kooltronic Refrigeration System Manufacturing [55Kb]
	Kooltronic Standard Warranty [55Kb]
	Kooltronic Unit Longevity Press Release [167Kb]
	NEMA Enclosure Ratings [91Kb]
	Short-Form Catalog (16 pages) [897Kb]
	Airflow Switch Data Sheet [159Kb]
	Heat Exchanger Quick-Sheet [90Kb]
	Laboratory Environmental Testing Services [157Kb]
	Powder Paint Application Facilities Flyer [165Kb]

Operator's Manual

KLLC100 Lead-Lag Controller (Discontinued) [38Kb]
KLLC480 Lead-Lag Controller [79Kb]
KXNP Series Operator's Manual [423Kb]

Contact Info:
	Kooltronic, Inc. 30 Pennington-Hopewell Road Pennington, NJ 08534 USA
	609-466-3400 800-321-KOOL
	609-466-1114 (fax)
	Contact Us

	KLLC100 Lead-Lag Controller (Discontinued) [38Kb]
	KLLC480 Lead-Lag Controller [79Kb]
	KXNP Series Operator's Manual [423Kb]

TrimLine Series KXNP47Air-to-Air Panel-Mounted Heat Exchangers

TrimLine Series KXNP47
Air-to-Air Panel-Mounted Heat Exchangers