Powder Paint Application Facilities At Your Service!

Kooltronic, Inc. is pleased to announce that we are making our custom state-of-the-art powder paint facilities at our Pennington, NJ plant available for your sheet metal finishing.

Kooltronic’s new automated powder paint system can be used in a wide range of applications with different textures and finishes that require a powder coated finish.
User-specified custom colors are applied with an automated process that exceeds the 720 hours of Salt Spray accelerated testing per ASTM B117-97 (Bellcore Specifications).
Our continuous conveyorized automatic process can handle large volumes efficiently.
Kooltronic offers true flexibility with an additional manual batch paint booth for small production runs.
Our automatic paint booths can handle parts up to 24” deep x 48” long x 72” high.
Special masking can be done as part of our custom service.
The powder paint finishing process applied at Kooltronic is non-polluting and environmentally friendly.

View Flyer

The automated wash system and dry-off oven.

One of our three powder paint application booths.

Kooltronic Powder Paint System Features:

Overhead Conveyor System - Transports the parts in a continuous loop through all of the stages of the painting process. It allows us to handle a large volume of work with accuracy and efficiency.
Five Stage Power Wash/Pretreatment System - This step is the key to the excellent corrosion protection afforded by the Kooltronic Powder Paint System. The pretreatment process prepares painted parts and creates a solid foundation for our baked on epoxy or polyester powder coatings. Each stage uses a tank, recirculating pump and nozzle array. All solutions are sprayed with nozzles directed at the parts from both sides of the Power Wash Tunnel. The five stage power wash/pretreatment system consists of:

First Stage - A heated wash.
Second Stage - A heated rinse.
Third Stage - A pretreatment solution is applied to the unpainted parts.
Fourth Stage - A heated rinse is used to remove the pretreatment solution.
Fifth Stage - The final step is a sealer.

At each stage of the above pretreatment process, the system chemistry is maintained to assure a level of quality that will protect your parts from harsh weather and corrosion.

Water Dry Off Oven - Heated air, maintained at a uniform temperature, is circulated around the parts to dry the chemical protection applied during the pretreatment process.
Paint Powder Application - Three powder paint booths are available for your use. Booths feature manual as well as automatic paint gun stations to assure maximum coverage.
Cure Oven - Painted parts are heated in circulated air that is maintained at a uniform temperature.

Powder paint booth.

Parts exiting the water dry-off oven.

Contact Info:
	Kooltronic, Inc. 30 Pennington-Hopewell Road Pennington, NJ 08534 USA
	609-466-3400 800-321-KOOL
	609-466-1114 (fax)
	Contact Us